What should I do if I over or underwater my African blood lily?
Overwatering is all too easy with the African blood lily. It doesn’t require a lot of water in the first place and overwatering can lead to bulb rot. Some symptoms include: -Mushy bulb -Spotted, flopping stems -Droopy flowers -Yellowed stalk It is normal for yellow leaves to develop when African blood lily has reached the end of their blooming period. However, if the leaves turn yellow before the flowers have bloomed, it is a sign of over watering. Bulb rot is common and cannot be reversed, unfortunately. If you catch it early on, you will need to dig up the bulb and carefully remove the rotten portions. From there, you should remove all the soil that the plant grew in. If you use a pot, thoroughly disinfect it and any tools you use to avoid spreading the fungus. For outdoor plants, you should plant them in a different location. There’s not as much of an issue if you underwater this plant. Of course, you don’t want the soil to dry out entirely, but it’s much easier to solve an underwatering problem than an overwatering one. Some signs that your plant is underwatered include: -No blooms -Sagging, wizened stalks -Browning around the edges of the flower petals If you have given your African blood lily too little water, then do not panic. It has a level of drought tolerance. Once you have realised, give it a good drink but do not saturate the surrounding soil. Just make sure it is moist.But do not give them too much and overwater them, you just need to let the soil to be mosit. Extended periods in water can lead to root rot and fungus growing on the bulb. The fungus can cause serious damage to the bulb which is noticed through spots that appear on the leaves and buds. The tips of the leaves may also discolor and die.
How often should I water my African blood lily?
African blood lily is fairly hardy and doesn’t need a ton of attention. While you can grow it in a pot, it does the best grown directly into the ground in the hottest/brightest part of your garden. Since this is a bulb plant, you’ll need to be extra careful about overwatering while the plant is growing as it will rot the bulb. Once you have planted your African blood lily, water them well once and then leave them. That initial watering will kick start their growth, but after that you can leave them be until you see shoots appear. For the best results, you’ll want to check the moisture of the soil after the growth of new leaves. Put your finger about an 2-3 inch below the surface of the soil. If it’s still wet, you don’t have to water the plant. For potted plants, you should also check the water collection train to see if there’s any standing water. If there is, you should avoid watering the plant. For a more accurate moisture reading, stick a moisture sensor about 2-3 inches into the soil. The reading should be in the middle of the ‘moist’ category. The recommended frequency of watering your African blood lily is once per week.
How can I adjust my watering for different conditions for my African blood lily?
The African blood lily is a hardy plant and can survive a variety of harsh conditions. If you plant outdoors, you can usually get away with letting mother nature take the reins. It doesn’t require much in the way of water maintenance and can survive long periods of drought. You should just make sure that the soil you plant it in provides adequate drainage. When it comes to potted African blood lily, you need to be a bit more careful with your watering. Since this is a bulb plant, it is prone to bulb rot if it is overwatered. You can get away with watering your plant less inside. And, of course, make sure your pots have proper drainage holes! Use good quality, well-drained soil. Add some sand or rocks to increase drainage. The most you’ll be watering the African blood lily is during its growing phase. You should water about one inch per week to encourage the flowers to bloom. Withhold water until the stalk appears and then begin watering as normal. Of course, how much you water during the growing phase also depends on the overall humidity and temperature. If you live in a hot, dry climate, the water will evaporate faster so you might need to water your African blood lily more often. If you’re in a more humid climate, you can probably water your African blood lily less. Always check the soil moisture level to make sure it’s not too wet. These plants prefer well-drained, moist soil.
Do I need to prune my African blood lily?
Far from damaging the plant, regular pruning will actually encourage African blood lily to produce more blooms. There are two primary forms of pruning for African blood lily. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning African blood lily is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. When nature runs its course, African blood lily will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.
When is the best time to prune my African blood lily?
There are two primary forms of pruning for African blood lily. The first is deadheading, which is the gardening term for removing spent flower heads once they start to wither. This concentrates the nutrients for the other flowers and allows the plant to flower better. The final process for pruning African blood lily is the removal of yellow and diseased leaves, which increases plant ventilation and light penetration and facilitates plant growth. Since African blood lily requires two types of pruning, you’ll be trimming your plants throughout the growing season. Pinching is most effective in the early spring before the plant develops any flower buds. Removal of yellowing or diseased leaves can be done at any time during the growing season. When nature runs its course, African blood lily will bloom once, produce seed heads, and attempt to reproduce for the rest of the year. But, by consistently removing flower heads before they go to seed, you encourage the plant to continue producing more blooms for a longer flowering time. Finally, deadheading takes place as soon as the plants are producing full flower heads. Expect to take off spent blossoms from mid-summer through the first frosts of fall. When the plant starts to wilt during the full, you should cut off the wilted part above the soil as well.
What tools should I prepare for pruning my African blood lily?
African blood lily doesn’t take much special equipment for pruning. A basic pair of scissors or garden shears should do the trick. It’s a good idea to ensure they are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden. Some gardeners avoid using tools altogether and merely pinch off the blossoms with their fingertips. That can be a faster technique, but you run a larger risk of bruising the plant stems or accidentally pulling them out of the ground completely.
Are there any instructions for pruning my African blood lily?
Here’s an overview of pruning instructions for African blood lily based on which of the two types you’re completing. By completing these two types of pruning over the lifespan of your African blood lily, you’ll encourage them to produce bigger, better flowers for far longer than the plants would otherwise. It only takes a few minutes to complete each step of the pruning process, and you’ll reap the rewards of your efforts for weeks to come. Deadheading Deadheading is a fast, easy way to refresh your garden by removing old flowers and providing space for new ones to take their place. You can use your fingers to pop off old flower heads as soon as they look tired, although you’re less likely to damage the plant if you use shears instead. When deadheading, make sure you cut well below the flower so that you aren’t left with a long, flowerless stem sticking out in your garden bed. Instead, cut the stem to just above the point where the side stem joins the main plant. Remove yellow and diseased leaves, this increases the ventilation and light penetration of the plant and facilitates its growth. When pruning, the leaves need to be trimmed off together with the petiole. It is best to use sterilised scissors to cut them off. Note: It’s a good idea to ensure scissors or garden shears are clean before use—you can soak them for thirty minutes in a solution of one part bleach diluted in nine parts water. This reduces the risk of spreading disease lingering on contaminated equipment into your flower garden.
How many hours of sunlight does African blood lily need to grow?
African blood lily typically needs at least six to eight hours of direct sunlight every day. If you are growing your plant outdoors, make sure to choose a spot that receives full sunlight throughout the day. If you are growing your African blood lily indoors, try to place it near a south-facing window or another location that receives plenty of sunlight. While African blood lily needs full sunlight to grow and thrive, it’s essential to avoid exposing them to direct sunlight during high temperatures, such as over 35°C(95℉) or during hot summer afternoons. If the sunlight is too intense, it can cause the leaves to become scorched or wilted. To avoid this, you can consider using sheer curtains or blinds to filter the sunlight or moving the plant to a shadier spot.
What will happen if African blood lily doesn’t get enough sunlight?
If your African blood lily doesn't receive enough sunlight, it may struggle to grow and may become weak and leggy. The leaves may also start to turn yellow, indicating that the plant is not getting enough sunlight to produce chlorophyll. In extreme cases, the plant may even die.
What will happen if African blood lily gets too much sunlight?
While African blood lily needs full sunlight, it’s crucial to avoid exposing it to too much direct sunlight. If the plant is exposed to intense sunlight for an extended period, it can start to show signs of sunburn, such as brown or scorched leaves. To avoid this, make sure to monitor the plant and move it to a shadier spot if necessary.
What is the optimal temperature for African blood lily?
For this tropical plant to thrive, you’ll want to keep them between 75℉ and 90℉ (25-32℃). Each species can handle temperatures outside of this range, but keeping it within several degrees of these limits will ensure they grow to their maximum potential. As for its extreme temperature limits, any environment below 50℉ (10℃) or above 95℉ (35℃) will begin to hinder its growth and cause various aberrations to its leaves and stems. This is especially true with low temperatures; even a light frost can cause your tropical plants to perish. Cellular death can begin to happen at a rapid pace, with some species dying in as little as 12 to 24 hours.
Does African blood lily require different temperatures for different growing phases?
While African blood lily doesn’t require any changes in temperature to enter different growing phases, it is important to stay consistent. Wild temperature fluctuations can slow down its growth regardless of its current phase, so it's always better to keep them in a controlled environment. That optimal temperature range of 75℉ and 90℉ (25-32℃) is vital to maintain, especially staying above the lower limit. Going above 90℉(32℃) isn’t ideal, but as tropical plant it won’t suffer too much. On the other hand, going below 50℉ (10℃) (and especially 40℉/5℃) will begin to directly damage this heat-loving plant species.
Does African blood lily need different temperatures for different seasons?
African blood lily does not need different temperatures for different growing seasons. The most important step in seasonal care is to keep the environment within the optimal temperature range. That's why it's always best to keep this plant indoors. That way, you can control the temperature no matter what the climate is like outside. Light is also important for tropical species, with all of these plants preferring a partial side level of sun exposure. This means any light they receive needs to be dappled or filtered, with bright but indirect light being the best option when growing your plants indoors. Too much direct sunlight can negatively affect your plant’s leaves, reducing its growth potential.
What are the temperature guidelines to keep your African blood lily healthy?
Tip #1: Don’t Leave Your Plant Near Windows in Colder Months If you want to make sure your plant isn’t exposed to colder temperatures, you may want to keep them away from windows. In colder months like late fall and winter, even the smallest draft can leak cold air into your home through cracks in your windows. While this air usually dissipates and warms up as it travels throughout your home, any plants placed in close proximity to the window will be affected. Move your tropical plants into an area where they will still get bright but indirect light, while making sure they won’t be affected by potential drafts. Tip #2: If You Find Dry Patches, Your Plant May Be Getting Too Much Sunlight or Heat You may notice the leaves become white or even scorched on a sunny day. These discolorations and unusual markings usually indicate that a plant is getting too much heat or sunlight, and it may be dehydrated. Excess light and heat will dry out the soil, stopping plants from getting the moisture they need to support their cellular structure. It also slows down or stops the process of photosynthesis, further hindering growth. If ignored for too long, these dry spots can spread and eventually result in the death of your plants. Tip #3: Avoid Frost at All Costs Colder temperatures and frost can damage your plants by causing ice crystals or disrupt normal physiological activity. This makes it nearly impossible for water to move freely throughout plant tissue, creating a deficit of moisture in their stems and leaves. You can tell a plant has been damaged by frost if it begins to suffer from hydrosis (it will appear as though it's soaked with water.) If the problem persists, your plants may begin shriveling and turning a dark brown or black hue. After that, the plant will almost certainly die.
What is the best way to maintain the right temperature for my African blood lily?
The best way to maintain the right temperature range for African blood lily is by keeping an eye on both the climate and humidity. You’ll want to try to keep each species in a room where you have access to climate control, keeping the heat in the temperature range best mimics its natural habitat. The humidity levels will also have a direct effect on temperature, so it's important to monitor these as well. You can artificially raise the humidity of your growing space by using a humidifier or lightly misting the leaves with water. If you intend to grow this species outside, you may find it difficult to maintain the right balance of temperature and humidity. If temperatures begin to drop or the air becomes too dry, your best option is to find room within your home and move your plant inside. An indoor growing space will allow you to control the climate more closely, helping your plant reach its full potential.
Why do I need to fertilize my African blood lily?
Fertilizer, and soil nutrients in general, are an essential form of fuel that your African blood lily will use to maintain healthy growth. In general, plants use the nutrients they find in the soil to develop new plant material and keep their existing components in good condition. For the African blood lily specifically, fertilization is necessary to help this plant display the best version of its flowers. Since the flowers are the main form of attraction to this plant, most gardeners will want to do all they can to ensure the flowers appear in their best form. Fertilization is one of the most reliable ways to help your African blood lily produce the best possible blooms.
When is the best time to fertilize my African blood lily?
The African blood lily goes through two main phases throughout each year. The first phase is the dormant phase, in which this plant will put forth minimal new growth. This dormant phase takes place during the winter. The other phase is the active growth phase, which takes place during spring and fall, which is when your African blood lily will need fertilization the most. Generally, it is best to fertilize your African blood lily starting in the spring months. You should repeat the feeding about once per month throughout the rest of the spring and through most of the summer. As fall approaches, you can begin to reduce your fertilization rate.
When should I avoid fertilizing my African blood lily?
You want to support African blood lily growth, but you also don’t want to cause root burn. Your plant is actively growing in the spring and summer, it’s when the extra nutrients are necessary. In the fall and winter, your plant will enter its dormancy stage. It’s when you want to stop fertilizing.
What type of fertilizer does my African blood lily need?
The ideal fertilizer for a African blood lily is one that has a relatively balanced mix of the three main plant nutrients, with slightly higher amounts of phosphorus. Alternatively, some gardeners choose to improve their African blood lily 's soil by adding organic materials such as compost, worm castings, and manure. Fertilizers can come in many forms, and most of these forms will work well for your African blood lily. However, some of the best fertilizers for African blood lily come in either a liquid or a powdered form. Regardless of which you use, you should ensure that you dilute your fertilizer and apply it while watering your African blood lily.
How do I fertilize my African blood lily?
Once you have found a suitable fertilizer and learned the ideal fertilization schedule for your African blood lily, you are ready to learn how to apply your fertilizer. When feeding your African blood lily, the most reliable method is to mix your liquid fertilizer with water before applying it to the soil. Each fertilizer may have different directions on how to feed your plants. Usually, it is best to follow the manufacturer's guidance on how to use the fertilizer they produce. These instructions should include information on how to properly dilute the fertilizer to prevent overfertilization. Mixing your fertilizer in water is an easy process, and once it is complete, all you need to do is pour the mixture into the soil where your African blood lily lives.
What happens if I fertilize my African blood lily too much?
Overfertilization is something that you should consider when caring for any plant, but it is especially important when growing a African blood lily. A African blood lily, when overfertilized, will show clear signs of distress, which, at times, may be so serious that they lead to the death of your plant. Overfertilized African blood lily will likely show leaf discoloration as well, including browning. In the worst-case scenarios, excessive fertilization will draw moisture out of your plant's roots, which can cause it to decline quickly.
Get tips and tricks for your plants.
Keep your plants happy and healthy with our guide to watering, lighting, feeding and more.
Download the App for Free